Offshoreonly.com - Distributor gear for Comp Cams billet stick?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Distributor gear for Comp Cams billet stick? (https://www.offshoreonly.com/forums/do-yourself-boating-budget/356648-distributor-gear-comp-cams-billet-stick.html)

Baja Rooster

09-13-2018 02:51 PM

Distributor gear for Comp Cams billet stick?

Brand new Comp Cams billet hydraulic roller cam 525EFI clone with DUI distributor. I’m trying to figure out what gear I currently have, or I guess the best option is the composite unit?

https://cimg4.ibsrv.net/gimg/www.off...3fd01202a.jpeg

SB	09-13-2018 02:53 PM

What is the part# of the cam ?

Baja Rooster

09-13-2018 03:05 PM

Part# 01-446-8w

It says that it’s a pressed on cast gear on the cam.

BillK

09-13-2018 07:05 PM

Quote:

Originally Posted by Baja Rooster (Post 4649045)

Part# 01-446-8w

It says that it’s a pressed on cast gear on the cam.

If that is the case then a stock gear will work fine. I prefer to replace them when going with a new camshaft.

Baja Rooster

09-13-2018 07:16 PM

Quote:

Originally Posted by BillK (Post 4649085)

If that is the case then a stock gear will work fine. I prefer to replace them when going with a new camshaft.

A hardened steel gear, correct?

SB	09-13-2018 07:47 PM

Quote:

Originally Posted by Baja Rooster (Post 4649045)

Part# 01-446-8w

It says that it’s a pressed on cast gear on the cam.

Thanks, that's why I asked. Stock cast iron gear will suffice. Cam has same gear a flat tappet cam could have.

Baja Rooster

09-13-2018 09:04 PM

Thanks all. The one question I had was does this look like a cast gear or steel?

All times are GMT -5. The time now is 12:38 AM.