Offshoreonly.com - Overbore my 502?

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Overbore my 502? (https://www.offshoreonly.com/forums/do-yourself-boating-budget/357429-overbore-my-502-a.html)

getrdunn

10-30-2018 07:30 PM

Quote:

Originally Posted by Tinkerer (Post 4656822)

The way I figured it. I was going after MAX HP - NOW - so if I had to replace the block later so be it.
If you damage a cylinder you could always sleeve it.

I left that part out with what I would personally do. Hah

mike tkach

10-31-2018 12:34 AM

the gen5 blocks are the thin wall blocks that max at 4.5.also ,it would be more cost effective to replace a block vs 8 sleeves.

Tinkerer

10-31-2018 07:25 PM

I agree - but he could sleeve one or two cylinders and save the cost of a $2000 + block

All times are GMT -5. The time now is 06:33 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page