Closed coolant heat exchanger question
#1
Registered
Platinum Member
Thread Starter
Closed coolant heat exchanger question
Does anyone know what is plug is ???
Do i need it??
WAS going to plumb power steering cooler from this port, but when i took it apart , i founf this ???
thanks ....
Do i need it??
WAS going to plumb power steering cooler from this port, but when i took it apart , i founf this ???
thanks ....
#2
Registered
iTrader: (1)
It's an anode. They help protect against corrosion.
Do not plumb any oil in here unless you want to mix it with cooling water.
Do not plumb any oil in here unless you want to mix it with cooling water.
#3
Registered
Platinum Member
Thread Starter
ahhhhhh,,,,,thanks SB
i thought it had to be something like that...
guess i should try to replace them..
or try to clean it up,,,but look pretty bad...
something else to find....hahaha
ahh,,,, found site boatzinc.com
https://www.boatzincs.com/engine-siz...xoCj7YQAvD_BwE
i thought it had to be something like that...
guess i should try to replace them..
or try to clean it up,,,but look pretty bad...
something else to find....hahaha
ahh,,,, found site boatzinc.com
https://www.boatzincs.com/engine-siz...xoCj7YQAvD_BwE
Last edited by flashgordon; 05-19-2019 at 09:55 AM. Reason: speeling