Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   Engine mounts (https://www.offshoreonly.com/forums/do-yourself-boating-budget/360752-engine-mounts.html)

AusScarab29 05-23-2019 06:48 AM
Originally Posted by Tinkerer (Post 4688094)
not really = not handy
They are just bigger
again my boat is a cat so it doesn't jump big waves like my Scarab did.
But I had the same mounts on my Scarab without any problems.
I solid mount my engines. The mounts on my Daytona don't have any rubber.
That and I have the rear mounts locked down so the engine can't twist or move.
Do you have any rubber in the rear mounts?

cdowjr 05-23-2019 07:52 AM
No. Just that donut gasket

Tinkerer 05-23-2019 09:45 PM
I used shims and shorter bolts to lock the rear mounts down wo they can't move.


All times are GMT -5. The time now is 01:34 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.