First timer with marine headers...
08-02-2019, 10:32 AM
#1
Registered
Thread Starter
Join Date: Jul 2019
Location: Nj
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
First timer with marine headers...
Recently just came across a great deal on headers locally for my 7.4 454 baja. Learning the hard way they weren't really close to my setup that i needed but they are doable. they are CMI Etop headers..i already figured out i need bravo tails ( looking for a set if anyone is selling any!!) Next issue im having is i have no welded on bungs to attach my shift cable bracket. now ive heard of being doing brackets on their transom when they swap to headers..anyone have any more pictures or info on this?
08-02-2019, 11:30 AM
#3
Platinum Member
Platinum Member
iTrader: (6)
transom, stringer, don't kink the cables
08-02-2019, 11:38 AM
#4
Registered
I would weld a plate to the cmi header for placement. I e seen them put down on the stringers and it looks like a nightmare to service if needed.
08-02-2019, 03:12 PM
#8
Registered
Thread Starter
Join Date: Jul 2019
Location: Nj
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
08-02-2019, 03:14 PM
#9
Registered
Thread Starter
Join Date: Jul 2019
Location: Nj
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
08-02-2019, 04:15 PM
#10
Banned
Join Date: Aug 2017
Location: Osaka, Japan
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Page 15. No pictures unfortunately. But Specifically the DIY kit is 28235P per David at CMI.
http://www.custommarine.com/pdf_docs/CMI-catalog-lo.pdf
http://www.custommarine.com/pdf_docs/CMI-catalog-lo.pdf
