Offshoreonly.com
Page 5 of 5
« First
3
4
5
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   Mercruiser 5.7L Fuel Pressure Regulator ? (https://www.offshoreonly.com/forums/do-yourself-boating-budget/371054-mercruiser-5-7l-fuel-pressure-regulator.html)

ranhood 05-22-2025 04:27 PM
I'm fuel injected. Tks for reply - i kno it's an old thread

DrFeelgood 05-22-2025 04:28 PM
Originally Posted by ranhood (Post 4926690)
I'm fuel injected. Tks for reply - i kno it's an old thread
What's your point? You have a fuel injected motor with a distributor, don't you?

ranhood 05-22-2025 04:31 PM
Good point! =| I was thinking the old distributor caps. It's original. You think that's best place to start? I've got my money's worth on this one!

DrFeelgood 05-22-2025 04:33 PM
Originally Posted by ranhood (Post 4926692)
Good point! =| I was thinking the old distributor caps. It's original. You think that's best place to start? I've got my money's worth on this one!
I have a 350 MPI in my boat. Last weekend hard starting. Distributor cap/rotor 2 years old. Contacts were corroded already and a new cap significantly improved the ease of starting. For < $50, it's where I'd start.

ranhood 05-22-2025 04:34 PM
And hella easier to get to! Tks again for your time! Keep ya posted


All times are GMT -5. The time now is 05:48 PM.
Page 5 of 5
« First
3
4
5
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.