Advice on Building an Engine, overseas
#1
Registered
Thread Starter
Advice on Building an Engine, overseas
Hi guys...my name is zole and im writing you from another continent...I have a chevy 502 big block with a holly 750 blowthrou carb with a m-1 procharger and a water coold inzercooler.It is a stock engine and it is going in a cris craft boat.Since nobody in europa does this kind of engines i decided to ask for help from you guys...Before I start sending spec is there sombody who is willing to help me make this engine run.I come from croatia a small country across italy
.thank you in advance and excuse my gramar
.thank you in advance and excuse my gramar
The following users liked this post:
getrdunn (05-10-2022)
#2
Platinum Member
Platinum Member
Welcome to OSO, bad grammar is forgivable. Some members (myself included) display poor grammar even though English is their first language.
Get your post count up to ten, then you may post pictures, they can be in this thread and totally meaningless. But if you can make them entertaining it is appreciated.
Once you start asking questions and let us know what your goals are, you will receive lots of help.
Get your post count up to ten, then you may post pictures, they can be in this thread and totally meaningless. But if you can make them entertaining it is appreciated.
Once you start asking questions and let us know what your goals are, you will receive lots of help.
#3
Registered
Thread Starter
Omg....thank you so much...It realy means a lot to me to know that sombody is willing to help a stranger across the world.But just so you know you and others who will help will be making history because this will be the first blowthrou engine ewer bild in this part of the world...nobody has ever made one..this will be the firs.Thank you again for your time
#4
Registered
iTrader: (7)
Omg....thank you so much...It realy means a lot to me to know that sombody is willing to help a stranger across the world.But just so you know you and others who will help will be making history because this will be the first blowthrou engine ewer bild in this part of the world...nobody has ever made one..this will be the firs.Thank you again for your time
#5
Registered
Thread Starter
Hey...sorry for not answering wright away im a father of 2 young boys so they are giving me a hard time...My country is beutiful we are a huge turist destination lot of celebretis come here.Wen i hit enough posts ill send pictures.Thank you for willing to help me...realy
#7
Registered
iTrader: (1)
Feel free to keep our celebrities.
The following 5 users liked this post by SB:
94sylvan (05-10-2022), Craney (05-10-2022), liberator221 (05-10-2022), rak rua (05-10-2022), underpsi68 (05-10-2022)
The following users liked this post:
SB (05-10-2022)
#10
Platinum Member
Platinum Member
iTrader: (6)