Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   Idiling the engine in a boat (https://www.offshoreonly.com/forums/do-yourself-boating-budget/375701-idiling-engine-boat.html)

SB 05-24-2022 02:08 PM
Gap plugs to .035 “. No higher than .040” or i’ll fly out there and poke you in your eyes. :) lolol

Zole 05-24-2022 02:29 PM
Originally Posted by SB (Post 4833224)
Gap plugs to .035 “. No higher than .040” or i’ll fly out there and poke you in your eyes. :) lolol
Roger that..over and aut:nicethread:

Zole 05-25-2022 09:42 PM
Europa calling for help...com in SB

Zole 06-08-2022 01:27 PM
Originally Posted by Zole (Post 4833227)
Roger that..over and aut:nicethread:
can i ask you for advice..it is regarding the mercruzer 7.4 i can't get it to work...i have a new simptom..every other cilindar is respondind on a drop cilindar test...so the 1 is responding the 2 is not the 3 is the 4 is not and so on...is that a simptom for somthing...tnx

F-2 Speedy 06-08-2022 01:45 PM
what do you mean drop cylinder test, how is this being performed

Zole 06-08-2022 02:17 PM
Originally Posted by F-2 Speedy (Post 4834826)
what do you mean drop cylinder test, how is this being performed
i turn on the engine and then start tu pull off cables from spark plugs and listen to the engine change rpm...on 4 cilinders he does not change rpm..

F-2 Speedy 06-08-2022 03:03 PM
do you have it wired like this


https://cimg1.ibsrv.net/gimg/www.off...807257aaf9.jpg

Zole 06-08-2022 09:06 PM
Originally Posted by F-2 Speedy (Post 4834837)
jes i have the firing order on the manifold....and it is a mercruzer

Zole 06-09-2022 11:09 AM
Originally Posted by Zole (Post 4834867)
jes i have the firing order on the manifold....and it is a mercruzer
problem solved...it was the carb


All times are GMT -5. The time now is 08:58 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.