|
HP500 Valve Springs
I have a pair of low hour HP500 Carb (Gen 6) that I picked up. I plan to replace springs, retainers and locks before installation. What is the go to replacement kit for these? The Comp 929's that come up on my search threads are no longer available.
|
call Ron Sporl (Ron Sporl Performance member here on OSO) he will know and most likely have them in stock.
|
I would prob choose Isky 8005-SP's
|
Originally Posted by Griff
(Post 4888901)
I would prob choose Isky 8005-SP's
|
If they're the same as a 525EFI than Teague stocks OEM replacement PAC springs. They are private label to Teague so you can't buy them anywhere else.
|
I used the Isky 8005A when I rebuilt a pair of 500 EFI's
|
Originally Posted by F-2 Speedy
(Post 4888944)
I used the Isky 8005A when I rebuilt a pair of 500 EFI's
|
Thanks for the info.
|
There's a calculator on this page that might help:
http://allmondmarine.com/valvetrain-engineering-services/ |
Originally Posted by NautiSouth
(Post 4892186)
There's a calculator on this page that might help:
http://allmondmarine.com/valvetrain-engineering-services/ |
| All times are GMT -5. The time now is 05:07 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.