![]() |
love the new 38ZR
2 Attachment(s)
Great boat.. ride is super... rides flat very smooth. the stagger engine set up make the boat very balanced.. no side to side rocking and the nose is not all up in the air.. very simular to the ZRC i had... loves the rough...
|
Sweet ride!!! Nice dock too.
|
Nice Jeff! How would you compare it to your T/G? Those Zr's run very well and take the rough very well!
|
Originally Posted by fountain40icbm
(Post 2877727)
Nice Jeff! How would you compare it to your T/G? Those Zr's run very well and take the rough very well!
no brainer in my book.... |
Great looking boat Jeff, congrats!!
|
Originally Posted by customryder
(Post 2877134)
Great boat.. ride is super... rides flat very smooth. the stagger engine set up make the boat very balanced.. no side to side rocking and the nose is not all up in the air.. very simular to the ZRC i had... loves the rough...
|
Great setup Jeff.......How fast will it run with the 525's?
|
Originally Posted by Jupiter Sunsation
(Post 2882645)
Great setup Jeff.......How fast will it run with the 525's?
|
Congrats! Great looking boat you have there. Enjoy it :)
|
Jeff, just curious what prop set up are you using? I'm testing Maimus and Herring righ now on mine.
|
Originally Posted by GK
(Post 2906733)
Jeff, just curious what prop set up are you using? I'm testing Maimus and Herring righ now on mine.
|
You should see 89-90 with the Herrings in the right water and load.
|
Had Doug Valentine (former Donzi team driver) test my boat last week with 31 p Herring's 5-blade took forever to get on plane. We got Bob Teague involved and he is sending over some Maxis 30 p we will try next week.
|
Originally Posted by GK
(Post 2907165)
Had Doug Valentine (former Donzi team driver) test my boat last week with 31 p Herring's 5-blade took forever to get on plane. We got Bob Teague involved and he is sending over some Maxis 30 p we will try next week.
|
The Herring props tested came with the boat, I'm the second owner. They do not have the defused ring, I assume they a lapped since they came that way from Herring. We tested the boat in fresh water with a 1/2 tank of fuel got 82 mph at 5200 rpm and slow to plane out of the hole. Low hour boat new condition, engines are perfect. Doug and Bob both feel the Maxis will retify the problem. I appreciate your suggestions, this is all new to me.
|
GK,
I had same boat with 525's, Hering props are very hard to get on plane with. If you get in rough water with a full boat you will really struggle. I would see a solid 89 with those props, I also had a set of labbed merc maximus which did plane easier but you will lose 3-4 mph for the trade off. I now have a ZR with 600's and the blow out on the herrings is even worse, but once you get going they are awesome. Good Luck! If you find a better prop combination, please post your results. Mark |
Originally Posted by MarkDonzi
(Post 2907746)
GK,
I had same boat with 525's, Hering props are very hard to get on plane with. If you get in rough water with a full boat you will really struggle. I would see a solid 89 with those props, I also had a set of labbed merc maximus which did plane easier but you will lose 3-4 mph for the trade off. I now have a ZR with 600's and the blow out on the herrings is even worse, but once you get going they are awesome. Good Luck! If you find a better prop combination, please post your results. Mark |
Originally Posted by GK
(Post 2907467)
The Herring props tested came with the boat, I'm the second owner. They do not have the defused ring, I assume they a lapped since they came that way from Herring. We tested the boat in fresh water with a 1/2 tank of fuel got 82 mph at 5200 rpm and slow to plane out of the hole. Low hour boat new condition, engines are perfect. Doug and Bob both feel the Maxis will retify the problem. I appreciate your suggestions, this is all new to me.
|
Today I got 85 mph trimmed at 3-4 with the Herrings but takes too long to get on plane. Bob Teague will be sending me some 30 maxis this week. Hpfully that will work.
|
Originally Posted by customryder
(Post 2907980)
what speed are you running with the 600s?
|
congrats Jeff..looks good.:grinser010:
|
Originally Posted by Jassman
(Post 2910122)
congrats Jeff..looks good.:grinser010:
|
| All times are GMT -5. The time now is 02:17 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.