Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Donzi (https://www.offshoreonly.com/forums/donzi-34/)
-   -   Shortie lower unit on a 25ZX or 27ZX??? (https://www.offshoreonly.com/forums/donzi/294780-shortie-lower-unit-25zx-27zx.html)

cdail28590 04-19-2013 01:52 PM
On my buddies boat we have to put a new transom in it anyway because his is rotten, so getting the x raised will be cheaper than fixing it and buying a shorty drive. I don't think raising the motor 2-3" will affect the COG on a boat that will max out 65 (hopefully). I have heard the center of the prop shaft needs to be anywhere from 1.5"-5" below the bottom of the boat but I would like to see what people with this boat has their drive heights.

FIXX 04-19-2013 04:27 PM
fixx
 
Originally Posted by CaribouLou (Post 3908533)
OP's 1997 25zx is a NON stepped hull :party-smiley-004:
ok you got me,,im a year off,thought 97 was the first year for steps but it was late 97 and 98 was the first year for them..

MCKILLOP 04-28-2013 02:47 PM
Originally Posted by cdail28590 (Post 3908282)
How much different is a 97 25zx hull v/s a 87 25 zx hull? A buddy has to put a new transom in his 87 25 zx and we are trying to figure out what would be the best distance to raise the bravo drive.
There is no such thing as a 1987 25zx. There was a 1987 Z25, but that boat is quite a bit different than the ZX hulls.

cdail28590 04-29-2013 11:32 AM
I probably is a 25z. His just has a updated 25zx interior in it.


All times are GMT -5. The time now is 08:01 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.