![]() |
Originally Posted by myturn
(Post 4286292)
I have been thinking about downsizing. I was wondering how well
the Donzi classic 22 would handle offshore conditions like 2 to 3 and 3 to 4 feet seas. Thanks, Warren [IMG]http://i1141.photobucket.com/albums/...3/IMG_0212.jpg[/IMG] |
Please remember :
One person's 2-3's are not the next persons ! Boaters suk at estimating wave height. |
Originally Posted by SB
(Post 4290142)
Please remember :
One person's 2-3's are not the next persons ! Boaters suk at estimating wave height. |
When I was in Hawaii last year on my friend's 32 Sunny, I was shocked at the waves we were taking caution with and these nuts Hawaiians were happily plodding along in their 22s. I guess it's all up to you on what you're willing to take and how hard you're willing to abuse your boat.
|
The Donzi 22 Classic is not an off-shore boat but lots of us do it anyway. I'll bet Brownies new book will include stories of driving 16' Donzis across the ocean to the Bahamas. You have to watch the conditions but if the water isn't kicking up too bad they are really fun little boats. Mine looks so small tied up at harbors on the Great Lakes! One good trade-off is that I can use my boat on smaller inland lakes too. Oh, and after 20 years of boating one gets pretty good at determining wave height. I do it by talking to other boaters, listening to the radio and my own observations.
|
laughing at the 22's can run 60-70 with bursts up 80 in 3-4 ft waves comment...
|
The 22' Donzi classic can handle just about as much as any other 22' boat. I've run in 3-4-5 foot waves a few times during my yearly adventure from the CT River to Block Island. You won't be going vary fast in those conditions though; tabs down and on plan at 25-30mph.
|
Originally Posted by 1MOSES1
(Post 4297268)
laughing at the 22's can run 60-70 with bursts up 80 in 3-4 ft waves comment...
My point being that I'm sure a 22 could be pushed to 80 3-4ft waves if one is crazy enough... |
I remember George's Donzi. It was the X-18 model. By far the coolest Little Donzi out there. Pro charged 400+ CI small block making 900+ HP with an Arenson surface drive. I know it ran over 110 and heard reports of over 120 MPH... Crazy fast for an old 18 ft hull. I had a 22ft classic myself and wouldn't hesitate to take it on the sound in 2-3 ft CHOP.... Not 3 ft waves, but close chop. Handled real well for a little boat and with 550 hp would run 80+
|
Originally Posted by kreed
(Post 4297391)
I remember George's Donzi. It was the X-18 model. By far the coolest Little Donzi out there. Pro charged 400+ CI small block making 900+ HP with an Arenson surface drive. I know it ran over 110 and heard reports of over 120 MPH... Crazy fast for an old 18 ft hull. I had a 22ft classic myself and wouldn't hesitate to take it on the sound in 2-3 ft CHOP.... Not 3 ft waves, but close chop. Handled real well for a little boat and with 550 hp would run 80+
http://www.donzi.net/photos/Donzivideo2.wmv http://www.donzi.net/photos/Donzivideo1.wmv |
| All times are GMT -5. The time now is 12:58 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.