35 zr
Anybody run shorty's on a 35 ZR with 496's ?
|
Bringing this one back as I’ve wondered the same. Also what the X dim is on a 496 boat without the ITS boxes vs a 525 boat with the ITS boxes...
|
I did find out, the 35zr with 496's and Bravo 1 X drives, have a 1/2" spacer from the factory. Going to remove the spacer and test.
|
1/2” spacers with sport master lowers or standards? Most of the 496 35s I see have standard lowers... must be a pretty high X then?
|
Originally Posted by IGetWet
(Post 4719978)
1/2” spacers with sport master lowers or standards? Most of the 496 35s I see have standard lowers... must be a pretty high X then?
|
Did you take the spacer out already? Results?
|
I did, haven't run the boat yet, has to warm up.
|
Just tried a 35ZR with two 496 HO and Raylar with an Imco 2" shorty and 1 1/2" spacer without boxes: it is extremely hard to get out of the water - not recommended at all.
|
All times are GMT -5. The time now is 10:07 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.