|
TRS problem
Yesterday was running along at about 3800 rpm when all of a sudden boat slowed and rpm's raced. Backed it off and stopped. When put it back in gear, nothing, prop didn't turn. Pulled it out of water and removed the prop. Noticed the hub on inside was shredded. OK-thats makes sense. Next, when I turned the prop by hand, while on the drive, it turned as normal until it got to one point where it made a clunking sound and was sloppy. Noise sounds like it is coming from the lower end near the prop shaft. Same noise when prop removed and prop shaft turned by hand.
Sound like I broke a tooth or two of a gear?? Drive TRS Prop Bravo 1 26P 4blade 650HP |
Sounds like you broke the lower unit gear set. I bet it's the right hand unit as they are weaker than the left.
If you want to say goodbye to drive failure, give me a call in the morning. I can send out a pair of Konrad drives and have you up and running by the weekend. Kurt 715-410-0735 |
We still have parts for TRS, if you don't want to spend the money for a new drive. I can turn your drive around very quickly. Give me a call first at; 954 237 0332
|
| All times are GMT -5. The time now is 09:49 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.