Offshoreonly.com - torque spec for bravo 1 nuts

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - torque spec for bravo 1 nuts (https://www.offshoreonly.com/forums/drives-lower-units/164986-torque-spec-bravo-1-nuts.html)

cloudmaster_321

07-31-2007 06:25 PM

torque spec for bravo 1 nuts

Looking to get the torque spec for the six nuts for mounting the bravo one to the transom assembly. Thanks

Ryan

oldandtired

07-31-2007 06:50 PM

I always tighten them to "about that much." If you want to be precise, the manual says 50 lb. ft. for the stern drive unit to bell housing attaching nuts.

Rene

cloudmaster_321

07-31-2007 07:03 PM

Quote:

Originally Posted by oldandtired (Post 2219031)

I always tighten them to "about that much." If you want to be precise, the manual says 50 lb. ft. for the stern drive unit to bell housing attaching nuts.

Rene

much appreciated.......

All times are GMT -5. The time now is 02:57 AM.