gear change from Bravo One 1.65 to 1.5
#1
Registered
Thread Starter
Join Date: Nov 2003
Location: Ottawa Ontario
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
gear change from Bravo One 1.65 to 1.5
I understand from other posts that the gear swap would be in the upper only. Is there a gear set that can be purchased? I've looked online and can't find a single package of the necessary gears being sold. Thanks.
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
2 questions,, why do you want to change, and what is the drive serial number?
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#3
Registered
Thread Starter
Join Date: Nov 2003
Location: Ottawa Ontario
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Marc: I'm running a 30 pitch Bravo One on my 1.65 drive behind a 496HO. Thinking of moving up in power and might run out of prop, or, at least, have too much slip if I get into 34 or 36 pitch props. Don't have serial number handy, but its a 2003 standard bravo drive.
#4
21 and 42 footers
Platinum Member
I needed to make this switch for a spare a couple years ago...I just bought a complete upper 1.50 and then sold the 1.65 upper. Ended up about breaking even on money once it was done.