Anyone need Bravo gears?
06-15-2008 | 08:20 PM
#1
Thread Starter
Charter Member #34
Joined: Oct 2000
Posts: 7,151
Likes: 2
From: Beautiful North Carolina
Anyone need Bravo gears?
I have two complete sets of Bravo XZ gears I want to sell.
These came out of Mercury Bravo XZ drives I bought new in 2005 from Don Carter in Florida. They ran behind 500 EFI engines and I used Royal Purple gear oil and changed it at 20 hours or less.
The drives had 160 trouble free hours when I pulled them off this winter and had them converted to XR's to handle added horsepower.
Two complete sets of Bravo XZ upper and lower gears 1.5:1 ratio.
$500.00 takes them all.
If you are building a drive on a budget or just want backup insurance them these are for you.
These came out of Mercury Bravo XZ drives I bought new in 2005 from Don Carter in Florida. They ran behind 500 EFI engines and I used Royal Purple gear oil and changed it at 20 hours or less.
The drives had 160 trouble free hours when I pulled them off this winter and had them converted to XR's to handle added horsepower.
Two complete sets of Bravo XZ upper and lower gears 1.5:1 ratio.
$500.00 takes them all.
If you are building a drive on a budget or just want backup insurance them these are for you.
06-23-2008 | 02:10 PM
#3
Charter Member #601
Joined: Dec 2000
Posts: 3,276
Likes: 5
From: Holland, Mi USA.
dykstra,
yes they will fit, but you will need to change the input yoke to the larger spline. It would be the same as the XR input shaft. Imco makes a nice yoke that does this swap. Let me know if you need more info, I took the XZ gears out of Dock's drives and installed XR's.. Give me a call if you wish. 616-403-1006
Dick
yes they will fit, but you will need to change the input yoke to the larger spline. It would be the same as the XR input shaft. Imco makes a nice yoke that does this swap. Let me know if you need more info, I took the XZ gears out of Dock's drives and installed XR's.. Give me a call if you wish. 616-403-1006
Dick
