Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   XR upper gear sets needed: (https://www.offshoreonly.com/forums/drives-lower-units/200984-xr-upper-gear-sets-needed.html)

t500hps 01-04-2009 11:18 AM

XR upper gear sets needed:
 
XR upper gear sets needed:
Took the top caps off to look over the gears.....little pieces missing from the faces of the teeth. Right in the middle, nothing missing along the edges of the teeth.
Anyone have a good source for 1.50 XR upper gears for OM167XXX drive (s). I need 2 sets. :(

thunderusone 01-04-2009 01:54 PM

I got a used set $400.00.

MDGperformance 01-04-2009 02:21 PM

Give me a call on monday,I can hook you up with a good price on a couple of new sets,I also have a couple of used sets but would recommend going new,when the gears start chipping it is time to replace,good idea to inspect usually when gears break it trashes the housing.Dave 410-956-5381

jeff1000man 01-04-2009 02:30 PM

Call Scott or Bill at Victory Marine. They advertise here on the board. They have a ton of that stuff in stock and give great deals.

Good luck

thunderusone 01-04-2009 02:49 PM


Originally Posted by MDGperformance (Post 2770379)
Give me a call on monday,I can hook you up with a good price on a couple of new sets,I also have a couple of used sets but would recommend going new,when the gears start chipping it is time to replace,good idea to inspect usually when gears break it trashes the housing.Dave 410-956-5381

I thought this was for individuals?

t500hps 01-04-2009 04:54 PM

Thanks guys...I'm not looking to replace with used, my concern is that I'd just be putting the same thing I have right back in them.

MDG, I'll give you a call tomorrow.

thunderusone, any more info? condition? previous use? hours, etc?

jdub 01-04-2009 06:33 PM


Originally Posted by thunderusone (Post 2770403)
I thought this was for individuals?

What...the tech section? I think Dave was just answering his question.

thunderusone 01-04-2009 06:48 PM


Originally Posted by t500hps (Post 2770469)
Thanks guys...I'm not looking to replace with used, my concern is that I'd just be putting the same thing I have right back in them.

MDG, I'll give you a call tomorrow.

thunderusone, any more info? condition? previous use? hours, etc?

Here you go.

http://www.offshoreonly.com/forums/s...-gear-set.html

I have a complete set of spare drives now....so I dont need the gears.

t500hps 05-12-2009 10:11 AM

bought one set......now I need another :(

jeff1000man 05-12-2009 10:17 AM


Originally Posted by t500hps (Post 2864349)
bought one set......now I need another :(

Victory Marine talk to Scott or Bill


All times are GMT -5. The time now is 11:31 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.