Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   drive coupler failure (https://www.offshoreonly.com/forums/drives-lower-units/217029-drive-coupler-failure.html)

ballon78 03-17-2010 06:20 PM
Any problem using grade 8 bolts to fasten the coupler to the flywheel on a 502? the stock bolts have washers bilt in, can i just use a flat washer and bolt and locktight? or should i use lock washers and grade 8 bolts, just bolke one torqueing it and tring to finish tonight.... thanks


All times are GMT -5. The time now is 10:14 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.