Offshoreonly.com - Dimensions for #3A vs. #5 SSM

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Dimensions for #3A vs. #5 SSM (https://www.offshoreonly.com/forums/drives-lower-units/218988-dimensions-3a-vs-5-ssm.html)

RMPRam

10-22-2009 09:32 PM

Dimensions for #3A vs. #5 SSM

Does anyone have the dimensions, for the distance from the centerline of the input to centerline of the propshaft for a #3A drive and a #5 drive. I have it written down somewhere, but can't find it.
Thanks for any help.

Gary

rv	10-23-2009 07:17 AM

Whats a matter Gary, you loose your tape measure...
Or is it you don't know which set of the 3A or 5's to pick in your garage to measure.

Rick

Biggus

10-23-2009 07:56 AM

SSM III, 24.311" Input shaft to propshaft

SSM IV, V, 18.687"

RMPRam

10-23-2009 08:10 AM

You know, that you are too lazy, when you have 4ea. #3A's and 7ea. #5 drives, in the shop, and it takes too much of your "valuable" time to go measure these differences.
Thanks for the measurements.

tssteph

10-23-2009 09:43 AM

Here is what I have

Bravo 22"

SSMII 25.122"

SSMIII/IIIA 24.311"

SSMIV 18.687"

SSMV 18.687"

SSMVI 18.5"

IRONMAN

10-27-2009 10:16 PM

Quote:

Originally Posted by tssteph (Post 2978179)

Here is what I have

Bravo 22"

SSMII 25.122"

SSMIII/IIIA 24.311"

SSMIV 18.687"

SSMV 18.687"

SSMVI 18.5"

I had the TRS at 24" also if someone can confirm this?

A.O. Razor

11-02-2009 02:56 PM

I thought that the bravo was 21-13/16? Oh well:lolhit:

All times are GMT -5. The time now is 04:42 AM.