Zeiger ITS extension box?
 

Does anyone have experience or know of someone with experience using the extension box for ITS from Zeiger? I know there are some venders here who carry it, but I would like to hear from someone who has actually used it.

http://www.everettperformance.com/Ze...ion_Spacer.asp

We are a Zeiger dealer, but we have not sold or installed one yet.. If it works as well as their other products I think it will be nice enhancement.. It is nice to have alternatives to Merc's Its & such.. :) Jamie / Lakeside

.

Yeah, I am already a Zeiger Fan and have several of their pieces already. Just hoping to hear some 1st hand experience. :drink:

.

The test boat was a 38 Top Gun with 900+ Zuls. The testing was done at Lip Ships.

Straight bottom?

I would have thought a 38 TG TS would already be doing 110 with 900 Zuls.

Any issues with the mounting/assembly over time?

.

5" is not much set back
Steve

When are you going to get the Arneson's and forget this Bravo stuff:D

Now you are talkin'....!!!!!!!

For me, it is about dropping the motors. If I were starting from scratch, This is the way I would go.

.

Plus the 7" that is in the ITS to begin with for a total of 12"

.

http://lipship.com/preowned/040907-T...007topgun.html

Try 675 Zuls!!!! 101.6 MPH

900's would run 110+

Rik, have you done any 38 500/525 boats? I know you did bigger powered twin step guns with great results.

They won't drop very much. An inch or two at the most.

Nothing that small for power in the Cig's. I've done Formaula's with 500's and 525's.

Anyone know the hours on this rig?

.

Care to share resuls? I figure a 382 goes ~78 w/ 500, and ~80 w/ 525 and bravos.

I missed it was for an ITS that makes much more sense.
Steve

:drink:

.

382 In Italy went from 81 to 89 with HP 500 EFI's (It was a F2 Boat)