Offshoreonly.com - Mc 1 Coupler

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Mc 1 Coupler (https://www.offshoreonly.com/forums/drives-lower-units/227980-mc-1-coupler.html)

Flamingo 42

04-08-2010 01:26 PM

Mc 1 Coupler

Does anyone know if a Alpha drive will work with a MC1 drive coupler?:confused:

hoozeyurdaddy

04-09-2010 08:23 AM

It should, I beleive the input shaft splines are the same.

Flamingo 42

04-09-2010 10:04 AM

we installed an older motor that had a MC1 drive and had to use the coupler that was with it. When we tried to install the drive the input shaft dosn't want to slide in, we checked the alignment and it's good...any ideas

hoozeyurdaddy

04-10-2010 08:42 AM

when you checked the alignment, was it with a alignment bar.
as far as I know the spines are the same. maybe someone else has some input?

All times are GMT -5. The time now is 10:44 AM.