|
Scx helment
Do you have to have the hp gimble ring for the scx helment or will it fit on the standard one?
|
The SCX helmet will fit on a standard gimble ring.
Chris |
But the standard ring has screw in hinge pins and the hd doesn't I thought
|
Originally Posted by dennis r
(Post 3125598)
But the standard ring has screw in hinge pins and the hd doesn't I thought
I have done several. Chris |
This is just my opinion, but if you feel you have enough power to warrant upgrading to an SCX, I would think you also need an HP ring.
|
Originally Posted by Vinny P
(Post 3126676)
This is just my opinion, but if you feel you have enough power to warrant upgrading to an SCX, I would think you also need an HP ring.
One of the swaps I did was on a heavy cruiser with a B3 lower on it. The double blades of the B3 in combination with the 502 motor, kept eating uppers. The solution was to use a SCX upper with the B3 lower...problem solved. Either the standard gimble or the HP gimble will work with the SCX helmet. Chris |
Originally Posted by CB-BLR
(Post 3126740)
You are probably correct...but...
One of the swaps I did was on a heavy cruiser with a B3 lower on it. The double blades of the B3 in combination with the 502 motor, kept eating uppers. The solution was to use a SCX upper with the B3 lower...problem solved. Either the standard gimble or the HP gimble will work with the SCX helmet. Chris |
My Helmet Is Bigger Than Yours!!
|
My Helmet Is Bigger Than Yours!!
I got a good laugh from that one...:drink: |
You need a BIG helmet when you are in pursuit of Ludicrous Speed :)
|
| All times are GMT -5. The time now is 07:23 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.