Offshoreonly.com - setting heigt for new bravo 1

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - setting heigt for new bravo 1 (https://www.offshoreonly.com/forums/drives-lower-units/243238-setting-heigt-new-bravo-1-a.html)

gttdnbman

11-29-2010 06:29 AM

setting heigt for new bravo 1

I have a 27' Signature, bare hull it weighs about 2,000 pounds and I'm putting a 454 mpi with a bravo one out drive and I have the installation manual but its a little vague on setting the height I've measured other boats and there all a little different any help would be great thanks

Griff

11-29-2010 11:37 AM

I would set the X dimension at 17". Thats the factory setting on a 28 Pantera. Your hull should be pretty similar.

gttdnbman

11-29-2010 08:51 PM

Thank you 17 inches is an inch higher than the manuel and Im sure you know more than I do, I'd love one more persons input anyone else? Thanks Bman

All times are GMT -5. The time now is 09:59 PM.