Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   Bravo Gimble to IMCO Gimble? (https://www.offshoreonly.com/forums/drives-lower-units/244804-bravo-gimble-imco-gimble.html)

Keith Atlanta 12-30-2010 06:27 PM
Bravo Gimble to IMCO Gimble?
 
I am having my gimbles rebuilt with IMCO gimble rings. I have 496 Mag HO's and there are trim limit switches on my current set up.

How do I alleviate them without causing issues?
If I unplug them will they alarm out?
Can I just complete the loop without the sensor by hooking the wires together?

Raylar 01-05-2011 10:40 AM
ASK the guys at Imco, they will know that answer better than almost anyone else I can think of.

Best Regards,
Ray @ Raylar

Irishtornado 01-13-2011 10:28 PM
Originally Posted by Keith Atlanta (Post 3285921)
I am having my gimbles rebuilt with IMCO gimble rings. I have 496 Mag HO's and there are trim limit switches on my current set up.

How do I alleviate them without causing issues?
If I unplug them will they alarm out?
Can I just complete the loop without the sensor by hooking the wires together?
Keith I will take a picture of what I did when I get back home. Once you do this you will no longer have trim limit switches and will be able to full trim off the throttle and dash switches. You will no longer need to use trailer switch


All times are GMT -5. The time now is 01:46 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.