new drive from IMCO
04-29-2011, 11:48 PM
#1
Registered
Thread Starter
Join Date: Dec 2004
Location: shreveport, LA
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
new drive from IMCO
anyone have any info on the new out drive from Imco thats suppposed to be stronger than anything out right now. not to start rumors but heard from a good source that IMCO has a new drive they are testing that may be the key to big power, something completely redesigned. hope this is not 
04-30-2011, 04:23 PM
#5
Registered
Join Date: May 2010
Location: Oakville,ON & St. Pete's FL
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Someone please tell me that it bolts on without any modifications in place of my current Bravo One XR Sportmaster! Then please tell me it will handle 1000 hp. Oh, please only tell me this if it is true. Fingers crossed! 
04-30-2011, 04:33 PM
#6
Chris
Gold Member
I run about 1040 hp through my SCX upper/ SC lower combo...and have yet to break it.
The lower looks like a shortened SCX lower (-4")...which is much stronger than a SC lower.
Chris
Last edited by CB-BLR; 04-30-2011 at 04:39 PM.
04-30-2011, 05:33 PM
#7
Registered
Join Date: May 2009
Location: Kelowna BC canada
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
looks sweeeet!!! hopefully they can have some ready soon. Im getting tired of blowing propshafts on my sc lower. the scx uppers work flawlessly for me with 1300hp so im sure the new scx lower will also be able to handle some big hp. Its about time!!!
04-30-2011, 06:13 PM
#9
Registered
Join Date: May 2009
Location: Kelowna BC canada
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
There are 2 options with the scx lower, a #6 drive propshaft or a 1 7/16 shaft that accepts the square bore bravo style props. Looks like imco really did their homework on this new drive.
Last edited by JasonKelowna; 04-30-2011 at 06:14 PM. Reason: typo
04-30-2011, 08:08 PM
#10
Registered
Looks very promissing and I like that it can come with either shaft option... although if you're looking for something like this the 6 shaft probably makes the most sense.
One question, since this appears to basically be a surface drive, how large of a prop will it accept?
One question, since this appears to basically be a surface drive, how large of a prop will it accept?
