![]() |
Time for Arneson upgrades?
Anyone looking to upgrade from Bravos to Arnesons there is a set of ASD 7:coolcowboy: conversion kits just listed.
|
Good price for them too. :drink:
|
Great price & low hours.
|
Originally Posted by Slug-ger
(Post 3480916)
Anyone looking to upgrade from Bravos to Arnesons there is a set of ASD 7:coolcowboy: conversion kits just listed.
|
Didn't get the email. ASD 7s with bell housings pressure plates, transmissions, complete set up.
|
Originally Posted by Philm
(Post 3480927)
Good price for them too. :drink:
|
Ive wondered what these would do to my Stiletto
|
Originally Posted by drpete3
(Post 3485548)
Ive wondered what these would do to my Stiletto
|
Originally Posted by northerndoc
(Post 3485585)
Make it bulletproof on the drive end of things... :) But also make it a little dicey for swimming off the back of the boat. From what I understand because of the lack of parasitic power loss compared to a conventional drive, a lot of guys see about 7-10mph with the conversion too. Props are pricey though! 10K for a set of Herings if you decide to go the cleaver route. There was a thread on here about a guy who did the conversion to his 38' Formula... If I remember it went pretty well.
|
Originally Posted by northerndoc
(Post 3485585)
Make it bulletproof on the drive end of things... :) But also make it a little dicey for swimming off the back of the boat. From what I understand because of the lack of parasitic power loss compared to a conventional drive, a lot of guys see about 7-10mph with the conversion too. Props are pricey though! 10K for a set of Herings if you decide to go the cleaver route. There was a thread on here about a guy who did the conversion to his 38' Formula... If I remember it went pretty well.
|
Very well stated. In my application, speed & effiency wasn't a factor. If I had bigger power these wouldn't be forsale.
|
I'm seeing alot of broken bravo drive discussions in this forum. I have the answere for sale. Winter is on the way & time to stop crying about broken drives & do something about it. You will not beet the price. Check out the classifieds.:coolcowboy:
|
Originally Posted by Slug-ger
(Post 3485265)
Didn't get the email. ASD 7s with bell housings pressure plates, transmissions, complete set up.
|
Called you twice this weekend. Very interested call me asap.
|
Sorry, we were hit by the Hurricane. Try me today.
|
| All times are GMT -5. The time now is 06:46 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.