Offshoreonly.com - Lower unit thread chaser needed

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Lower unit thread chaser needed (https://www.offshoreonly.com/forums/drives-lower-units/276850-lower-unit-thread-chaser-needed.html)

flyinlow

05-20-2012 09:58 PM

Lower unit thread chaser needed

I am replacing a prop shaft on my Scarab TRS drive and need to either rent or borrow a thread chaser for the lower unit
it is the 4.375" (4 3/8") same as alpha and bravo drives
If anyone has one they would rent or sell please let me know
Thank You
Kevin

flyinlow

05-22-2012 05:38 AM

Anybody have a good source to buy one?
they are available on ebay but all I really need is the thread chaser not the wrench

Biggus

05-22-2012 06:20 AM

JR Marine has them.

http://www.jrmarine.com/products/1015.htm

Clustergear

05-28-2012 12:24 PM

If threads aren't to bad. Take an old carrier nut and cut with a hack saw lines across the threads at 45 degrees. This will work like a tap.

All times are GMT -5. The time now is 06:30 AM.