|
How to fix up and down play in the gimbel of a TRS?
I took my bellow off yesterday and I have
About 1/4" up and down play from the top And bottom hinge points. Is it possible to adjust It or do the hinge points have to be replaced? I check the side ones and they feel fine. |
Up and down play should only be .005"-.007". It's detrmined by the nut against the steering arm on the upper swivel shaft. In the diagram you need to loosen the steering arm cinch bolt and nut #18 & 19 and tighten nut #17. Clearance is measured between the top of the gimble ring and the gimble housing. Tightening nut #17 lifts the gimble ring.
http://www.perfprotech.com/store/ass....aspx#assembly |
Originally Posted by picklenjim
(Post 3712772)
Up and down play should only be .005"-.007". It's detrmined by the nut against the steering arm on the upper swivel shaft. In the diagram you need to loosen the steering arm cinch bolt and nut #18 & 19 and tighten nut #17. Clearance is measured between the top of the gimble ring and the gimble housing. Tightening nut #17 lifts the gimble ring.
http://www.perfprotech.com/store/ass....aspx#assembly http://www.cmmarinedistributing.com/...&productId=978 |
| All times are GMT -5. The time now is 11:14 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.