Offshoreonly.com - -3" shorty on bravo upper ?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - -3" shorty on bravo upper ? (https://www.offshoreonly.com/forums/drives-lower-units/279203-3-shorty-bravo-upper.html)

bor	06-22-2012 01:50 PM

-3" shorty on bravo upper ?

Wil a -3" shorty bolt on a bravo upper ?

the prop will interfere whit the cavation plate but planning to run a custom smaller prop.

anyone have left over ,can be case only whit vertical shaft

thx

bor

Griswald

06-22-2012 02:38 PM

Yes, with some mods to the upper case. I'm in the middle of one right now

Philm

06-23-2012 01:29 AM

You will either have to run a smaller prop, which will probably increase your slip a good bit, or you can cut the cavitation plate and space it up an inch. I dont know if someone made a kit for this or what, but i have seen a few with that setup before.

All times are GMT -5. The time now is 02:01 PM.