Offshoreonly.com - Konrad Ace drive setup

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Konrad Ace drive setup (https://www.offshoreonly.com/forums/drives-lower-units/282683-konrad-ace-drive-setup.html)

dennis r

08-13-2012 04:45 AM

Konrad Ace drive setup

Any on have the numbers for setting up a Konrad Ace out drive like rolling toqure spec. backlash ?

mercury

08-14-2012 08:04 AM

Lower vertical shaft rolling torque 10-12 in.
Pinion gear depth is measured with gauge-go-15. Gap should be .024-.026 in.
Backlash should be .017-.021 in
prop shaft rolling torque 25-30 lb-in

All times are GMT -5. The time now is 06:37 AM.