2 Attachment(s)
OK, The drives are finally installed. Had to custom make steering plates to replace the latham plates originally on the boat. They would not touch it. Shortened the tie bar and everything looks good. Next comes the water test.
|
Why they ever put XR's behind 600 SCi's was always a comical joke to me. Heck the 525 is already a mystery... Then the 600 and its torque curve - they had to be kidding.
|
Originally Posted by Keith Atlanta
(Post 3919264)
Why they ever put XR's behind 600 SCi's was always a comical joke to me. Heck the 525 is already a mystery... Then the 600 and its torque curve - they had to be kidding.
|
Originally Posted by MarkDonzi
(Post 3919223)
OK, The drives are finally installed. Had to custom make steering plates to replace the latham plates originally on the boat. They would not touch it. Shortened the tie bar and everything looks good. Next comes the water test.
|
Originally Posted by MILD THUNDER
(Post 3919303)
Another bend over and take it situation. Thanks Mercury. You'd think by now, they'd friggin STOP offering the Bravo XR on anything but a black engine.
525 and #6's That probably works pretty well! LOL |
how many blades on the props?
|
3 Attachment(s)
[ATTACH=CONFIG]501255[/ATTACH][ATTACH=CONFIG]501256[/ATTACH][ATTACH=CONFIG]501257[/ATTACH]Got my SCXs mounted
And a couple more upgrades- O and don't forget the extra Hundie Ponies!! |
Originally Posted by Quinlan
(Post 3930958)
[ATTACH=CONFIG]501255[/ATTACH][ATTACH=CONFIG]501256[/ATTACH][ATTACH=CONFIG]501257[/ATTACH]Got my SCXs mounted
And a couple more upgrades- O and don't forget the extra Hundie Ponies!! |
Originally Posted by johnnyboatman
(Post 3922596)
how many blades on the props?
|
looks like Im in the same position accept with a single engine cat. I just granaded a Mercury XR. Im running around 850 hp on a 26 foot Eliminator Daytona. Thinking about The SCX myself. Should i run a SC lower or a SCX lower? And if I run SCX what kinda loss in drag should I expect? Running 110mph now. And tell me about blue printing Drive? Lower I assume?
|
All times are GMT -5. The time now is 02:25 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.