Offshoreonly.com - 2" imco shorty bare case kit

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - 2" imco shorty bare case kit (https://www.offshoreonly.com/forums/drives-lower-units/288147-2-imco-shorty-bare-case-kit.html)

RiReuter

11-25-2012 10:21 AM

2" imco shorty bare case kit

http://www.imcomarine.com/cal_store/...-case-kit.html

If i buy this "kit" which comes with the vertical shaft and bearings can i take the prop shaft and bearings out of my bravo 1 lower and install in the new case? Thanks, Richie.

Ran-Dom 32

11-25-2012 11:11 AM

yes :drink:

RiReuter

11-25-2012 11:24 AM

Quote:

Originally Posted by Ran-Dom 32 (Post 3821142)

yes :drink:

beautiful, that's what i was hoping to here! :thankyouthankyou:

ROTAX454

11-25-2012 01:34 PM

Confirming that Ran-Dom is correct. Given that you are updating your drive, since you have it apart, why not do it right. Give these guys a call and get the internals from them. Buy the BARE case and have Max Worx shafts and bearings, etc. At a minimum, purchase a 1-1/4" prop shaft from IMCO. Better material then Merc and larger in diameter over the stock 1". All you have to change on the prop is the hub.

http://www.maxmachineworx.com/

All times are GMT -5. The time now is 07:35 PM.