Offshoreonly.com - Reinstalling TRS transom assy's. sealer?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Reinstalling TRS transom assy's. sealer? (https://www.offshoreonly.com/forums/drives-lower-units/294487-reinstalling-trs-transom-assys-sealer.html)

point92mach

04-12-2013 11:10 AM

Reinstalling TRS transom assy's. sealer?

Is sealer needed on the large cork gaskets between the TRS gimbal housing and transom of the boat?

Looking forward to getting the engines and drives back in my Stinger!!

Thanks,

Greg

sparky24

04-12-2013 11:57 AM

I would like to know as well looks like most of the water that was in my transom came from the assy leaking

sbslinde

04-12-2013 12:42 PM

I used 4200 when I re-installed my Bravo 1.

Insurance

Jeff

picklenjim

04-14-2013 08:24 PM

Quote:

Originally Posted by point92mach (Post 3904190)

Is sealer needed on the large cork gaskets between the TRS gimbal housing and transom of the boat?
Greg

No. TRS Manual says only use bellows adhesive to retain the gasket on the housing. No sealer between the gasket and transom.

All times are GMT -5. The time now is 05:49 PM.