Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   trs drive lower unit question? (https://www.offshoreonly.com/forums/drives-lower-units/297725-trs-drive-lower-unit-question.html)

01gsxrjt 06-06-2013 08:19 PM

trs drive lower unit question?
 
Ok here is the story I bought a Baja 320 that was missing the right side out drive. The guy lost most of the parts except the lower propeller shaft and gears/bearings. I bought another outdrive. but its the wrong rotation. I assume I can change the shafts/gears in the lower unit and get the correct rotation that I Need. My question is the bearing at the end of the shaft closer to the nose cone/front of the lower unit are different size am I able to change bearing race's or are the lower unit housing different I would assume the housing are not different from a mfg stand point would cost to much. Just want input to make sure im correct.. thanks for your help.

Biggus 06-06-2013 08:39 PM

TRS housings are machined for left and right hand rotation just different bearings for L & R hand

commandersander 06-06-2013 09:08 PM

+1
Different front and rear bearings (due to load)

01gsxrjt 06-07-2013 07:30 AM

Thanks thats what I thought. gonna swap lower unit shaft/gears soon.


All times are GMT -5. The time now is 08:54 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.