Offshoreonly.com - Question on x height

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Question on x height (https://www.offshoreonly.com/forums/drives-lower-units/300502-question-x-height.html)

kennyd

07-28-2013 07:37 PM

Question on x height

Trying to figure out x height , the only measurement that I have is prop shaft height of 7 inches below the hull trimmed full down . Am I correct on trimmed full down ?

Unlimited jd

07-28-2013 07:40 PM

Should be neutral, 7" is very deep. I imagine this is a trs boat? If its a re rig go up 2"

kennyd

07-28-2013 08:21 PM

Quote:

Originally Posted by lil red (Post 3966638)

Should be neutral, 7" is very deep. I imagine this is a trs boat? If its a re rig go up 2"

It was a trs boat, now konraddrives that are 1.78 in shorter .

All times are GMT -5. The time now is 08:58 PM.