Offshoreonly.com - Changing the rotion from RH to LH on imco drive

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Changing the rotion from RH to LH on imco drive (https://www.offshoreonly.com/forums/drives-lower-units/301361-changing-rotion-rh-lh-imco-drive.html)

tdpb2008

08-13-2013 07:17 AM

Changing the rotion from RH to LH on imco drive

I have a LH rotation bravo 1 that I want to upgrade to imco but it spins the opposite direction can I change the rotation to LH?

smokin' gun

08-13-2013 09:01 AM

Ya put it in reverse . Bravo drives run either way . Change cable at the control box

Tinkerer

08-13-2013 08:07 PM

Yup - You just change the cable to the other side of the shifter so that it pulls or pushes opposite of what it is doing now.

nailit

08-13-2013 09:31 PM

Just did this on my twins.. very easy and once I realized that the cables run straight up to the levers, I switched mine in about 20 minutes. 4 screws for levers and needle nose to get cotter pin out of rod holding all cables in place.

All times are GMT -5. The time now is 04:38 PM.