Offshoreonly.com - Hydraulic fittings on outdrive

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Hydraulic fittings on outdrive (https://www.offshoreonly.com/forums/drives-lower-units/309360-hydraulic-fittings-outdrive.html)

236eagle

03-05-2014 08:40 PM

Hydraulic fittings on outdrive

I had to remove my two rams on my bravo 1 which means I took hydraulic line off of rams. When I reinstall the rams is there something I need to put on the threads of the 1/4" tube fittings? Thank u

mike tkach

03-05-2014 09:09 PM

no,dont use anything on the threads but make sure you use a line wrench so you dont strip the hex.

236eagle

03-05-2014 09:10 PM

Quote:

Originally Posted by mike tkach (Post 4085228)

no,dont use anything on the threads but make sure you use a line wrench so you dont strip the hex.

Thank you!

mike tkach

03-06-2014 08:40 AM

my pleasure.

Mbam	03-07-2014 07:52 PM

I like moly coat or tef gel to make sure they come out easily next time.

All times are GMT -5. The time now is 12:17 PM.