Offshoreonly.com - Which drive shower for an XR with stock finned top cap?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Which drive shower for an XR with stock finned top cap? (https://www.offshoreonly.com/forums/drives-lower-units/309714-drive-shower-xr-stock-finned-top-cap.html)

I also had a problem with clearing the steering. I did this.[ATTACH=CONFIG]530382[/ATTACH][ATTACH=CONFIG]530383[/ATTACH]

Keith....can't seem to get that link to work. Which one did you end up getting? How's it working out? Thanks

Thank you. Just wasn't sure if the shower alone would fit my stock finned cap or if I had to get their cap along with the shower.

Quote:

Originally Posted by Checkfour2 (Post 4283145)

Keith....can't seem to get that link to work. Which one did you end up getting? How's it working out? Thanks

Works fine. However, the first set of hoses were too short and needed to send back for longer ones. Then, once installed the pick up was extremely close to the prop. I had it cut down. So, after that I think I'm good.

Pain in the azz but I now have showers.

Quote:

Originally Posted by Sydwayz (Post 4283146)

http://www.maxmachineworx.com/accessories.htm

Yup. Thanks again Brian.

Quote:

Originally Posted by Checkfour2 (Post 4283154)

Thank you. Just wasn't sure if the shower alone would fit my stock finned cap or if I had to get their cap along with the shower.

Nope, there are spacers and it sits nicely above the stock finned cap.

Simrek, ask for paul a boater and one of the good guys... you wont regret it.... modt flow best and most adaptable showers.