Offshoreonly.com - X Dimension too high ?

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - X Dimension too high ? (https://www.offshoreonly.com/forums/drives-lower-units/316239-x-dimension-too-high.html)

GETU1

08-07-2014 08:06 PM

Thanks to all for the input and information. I have the performance sheet but there is no spec on the x dimension. I think at this point I am going to a set of 1 inchers from B Blades. I'll post the results afterwords and perhaps it will help another get dialed in.

ICDEDPPL

08-07-2014 08:40 PM

If you really wanna get technical the X dimension is the measurement from the crank to the bottom of the boat..I learned that the other day :D

jerryhaney

08-10-2014 12:40 PM

Put 6 blade Herrings on you'll love it.

All times are GMT -5. The time now is 01:27 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page