Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   bearing question Bravo upper (https://www.offshoreonly.com/forums/drives-lower-units/318078-bearing-question-bravo-upper.html)

articfriends 09-23-2014 12:55 PM
Originally Posted by buck35 (Post 4191644)
No radius? maybe thats why they are quick disconnect shafts.
The radius on the bearing we are talking about goes against the fwd pinion gear , no one has sheared a fwd gear base shaft off gear as its super thick and every other part in the drive would break before the gear base sheared, extra radius on this bearing does nothing so the 387 (that has a shorter radius on back) will pose no issues, Smitty

buck35 09-23-2014 09:35 PM
Just a generalization, I've seen plenty of sheared off shafts, and radius is key strength, or lack thereof.
Glad you are back on the water, or at least close. Afraid I'm going to run out of summer and water before I'm back together. :woohoo:

253 09-24-2014 08:53 AM
I just disassembled another Bravo1 and it had just the number 387 bearing, no A or B letters


All times are GMT -5. The time now is 02:55 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.