Offshoreonly.com - Cons to surface drive?

Page 4 of 4

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Cons to surface drive? (https://www.offshoreonly.com/forums/drives-lower-units/318649-cons-surface-drive.html)

ThisIsLivin

10-15-2014 07:01 AM

I'm looking at a 39 or 41 Velocity with 1600hp minimum, so definitely over 100.

Rik	10-15-2014 12:00 PM

Quote:

Originally Posted by ThisIsLivin (Post 4203306)

I'm looking at a 39 or 41 Velocity with 1600hp minimum, so definitely over 100.

Then a stagger setup on this application would be a good thing.

greenmonster383

11-24-2014 02:22 AM

Anyone running a 25' or 27' with a single surface drive? If you post a photo of the engine compartment that would be awesome. Looking for a visual of the layout from behind the motor to the transom.

Rik	11-24-2014 08:04 PM

Quote:

Originally Posted by greenmonster383 (Post 4224369)

Anyone running a 25' or 27' with a single surface drive? If you post a photo of the engine compartment that would be awesome. Looking for a visual of the layout from behind the motor to the transom.

looking for? The engine placement will depend upon which drive you are referring to and so on.

greenmonster383

11-24-2014 11:52 PM

Rik do you have any install photos of ASD6 in a single configuration in 25 V-hull or Cat?

Rik	11-25-2014 12:57 AM

Yes, we have everything from a 22' Eliminator to a 25' Talon, 26 AO, a 26' Firehawk (all the same boat essentially) a 25' Carrera and so on..

All times are GMT -5. The time now is 01:41 PM.

Page 4 of 4

« First

Show 40 post(s) from this thread on one page