-3 imco
#3
#4
It will clear a stock Bravo 4 blade prop. All You have to do is install the cavitation plate that comes with the lower and cut off what hangs below it. About 1/2 inch. I used a sawzall with a 12 inch metal cutting blade using the bottom of the cav plate as a guide. That is what I did to mine. I am running it on my Daytona.
#5
Registered
Thread Starter
Join Date: Jun 2012
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Do you have pics to better help me see it?
It will clear a stock Bravo 4 blade prop. All You have to do is install the cavitation plate that comes with the lower and cut off what hangs below it. About 1/2 inch. I used a sawzall with a 12 inch metal cutting blade using the bottom of the cav plate as a guide. That is what I did to mine. I am running it on my Daytona.
#8
Registered
iTrader: (1)
I have a 21 v hull whit 560 hp ls that I m converting to normal 5.0 mpi bravo to make it affordable to sell as I m building a new cat for speed whit twins ,going to use the ls for that and have 2 new xr s for the cat
used the imco for 15 hrs I bought it from the owner of revolution marine that used it on his personal boat for 30 hrs then he switched to scx-4
used the imco for 15 hrs I bought it from the owner of revolution marine that used it on his personal boat for 30 hrs then he switched to scx-4
#10
If you only plan on using a Bravo prop than you can just bolt on the cavitation plate that comes with the lower and cut off what hangs down below it. This is how mine looks.
[ATTACH=CONFIG]542441[/ATTACH]
[ATTACH=CONFIG]542441[/ATTACH]