starboard motor spins out after 1500
#11
Registered
Thread Starter
Join Date: Dec 2014
Location: NYC
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Still not grabbing water! I put the 23p props with brand new hubs and I can still feel the slipping on both motors even at low speeds but once I hit 2k starboard motor wipes out to 3500+rpm and boat slows down as if I shifted to neutral. When I lower the rpm I can feel it grab like letting out the clutch on a car it takes off.
The bravos are clearly different. But how different? Those are the drives I got when I bought the boat and both had the same residue and junk stuck to them meaning they ran the boat with them. Is it possible one is higher than the other? Could it be my steering?
The bravos are clearly different. But how different? Those are the drives I got when I bought the boat and both had the same residue and junk stuck to them meaning they ran the boat with them. Is it possible one is higher than the other? Could it be my steering?
#13
VIP Member
VIP Member
#14
Registered
Thread Starter
Join Date: Dec 2014
Location: NYC
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
I ran it on the hose and left the ears on the drive. Typical bayliner owner stuff lol. No more slipping...
can't get past 4k @51mph WOT with the 23p mirage+ on straight glass. I'm gonna try the 27p but I'm sure it'll go down instead of up. I should be at 4600 with 7.4mpi right?
can't get past 4k @51mph WOT with the 23p mirage+ on straight glass. I'm gonna try the 27p but I'm sure it'll go down instead of up. I should be at 4600 with 7.4mpi right?
#15
Platinum Member
Platinum Member
iTrader: (6)
I have a pair of 25m+ if your interested this is what came on my 33OL, if you cant spin the 23's over 4k there's something wrong