Offshoreonly.com - Isco drive slow to engage

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)

- - Isco drive slow to engage (https://www.offshoreonly.com/forums/drives-lower-units/335666-isco-drive-slow-engage.html)

medicman202

03-20-2016 08:30 PM

Isco drive slow to engage

I have a pair of IMCO drives on my boat. One of the drive has become slow to engage in forward. Its about 1.5. to 2 seconds slow than the port side. I have adjusted by drive cables to make sure there is no play but that did not work. Anybody tell where else I need to look.

Thanks for the help.

indysupra

03-20-2016 08:34 PM

Worn clutch cone is usually the issue. Did you just change the drive fluid over to synthetic?

medicman202

03-20-2016 11:39 PM

dives only have less than 100 hrs on them so I don't think I could ware a cone that fast. and I believe he replaced the fluid with synthetic but I will ask.But if it was an oil thing wouldn't effect both drives?

253	03-22-2016 07:51 AM

if one cone is worn more than the other it will delay engagement only on that drive especially with synthetic oil.

All times are GMT -5. The time now is 07:35 AM.