Marine drive system (MDS) outdrives
 

Hi everyone! I'm looking for spare outdrives, the ones I need are called Marine Drive Systems. The drive I need are number 07s. I was wondering if anyone had any laying around or any parts for them. Maybe someone knows where they are now and if there is someone I can call. Any help would be greatly appreciated. I believe they were out of Edison New Jersey. My father and I started racing again in the OPA so we would like to have some spares incase they go on us. Thank you!

http://www.offshoreonly.com/forums/general-q/113542-mds-marine-drive-system-outdrive-worth-$-like-trs-tr-surface-drive.html

caught my eye and looked it up, are these trs transom assembly and #2 speedmaster lower but w/ a crazy lookin upper, where it bolts to the t/a is lengthened ( like a stern jack) and from below the rear cap the housing is swept back on a 45 down to the trim cylinders. i seen pictures of what i described about 7 years ago and i wrote the guys phone number down on a trs service manual but as i recall 1 upper was broke, very few made. i sent pics to mel riggs, he said he never saw anything like it.

bob @ howells marine in canada had them

Thank you for the feedback, I'm going to post a picture later of the drives

I have 2 brand new merc 4 blade cleaver props that will fit #2 speedmasters. 600 for the pair plus shipping, can't remember the pitch and rake but will check if you are interested.

Yes I would be interested in the props

You're looking for a Stern Powr outdrive. You'll find more info by searching for "stern powr" (the spelling is correct). Team Archer had some for sale a while back, look them up.

I'm having trouble attaching the photo. It's in the link below, I hope everyone can see it. Thank you.


https://docs.google.com/document/d/1...it?usp=sharing

i was wrong, not the drives i thought they were. if you google sternpower, offshoreonly alot comes up.

http://www.sternpowr.com/

Props are mercury 4 blade cleaver, LH and RH , 27 by 15 , 19 tooth spline. My number is 705 549-4454. Thanks,
Mark

Thank you but I need something with a bigger pitch ( have the same one ) but thank you for checking I appreciate it

No problem, good luck with the racing.

Yup u got MX107 ODs With all the plastics 😳😳!!!!!!! On transom. Usually they fall off???? And the spelling is correct. SternPowr. Getting harder to find these dayz.
How much HP u putting in them??
U should send them out for a freshen up to make sure there ready for some abuse I got the guys # in Ohio to send them to knows them real well !!!
I got some other leads on parts but not the HP stuff
What kinda boat they on??

Kool. 😎😎😎😎😎

Can't find this in the search.
Can u help or redo it

Thanks

Found it never mind!!!

Bountyhunter!!
Ur uppers where the tie bar goes has been modified looks like to square off the top for steering. Did ur dad do this in the old dayz or is this the way u got it???

The boat is a 32 hydratech built in brick. The boat was rigged by a man named Al Page. The drives are mx 107s with the extension box set up. I got in touch with the guy that still rebuilds them, he is out of Maine now.

Is that the factory ur talking about or someone else
I here the factory is hard to get a hold of but I think he has someone helping him now
Watch those new gear set!!!!! They don't last , keep ur old ones as long as u can
😳😳😳😳😳😳