Bam Transmission Repair? - Where in Texas or Louisiana? Trust Issues?
#1
Registered
Thread Starter
Join Date: Oct 2009
Location: Splendora, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Bam Transmission Repair? - Where in Texas or Louisiana?
I have to get my BAM transmission repaired. Clutch plates are extremely warped. I think it is a Velvet Drive. Not Sure till I pull the engine out. I am trying to avoid shipping my transmission to Florida and I would like to drive to a location that can fix it. Is there anyone other than BAM Marine that can repair these transmissions for high performance applications, put them on a bench and test them that is located not too far from Houston, TX? Thoughts? Should I only trust BAM Marine?
Last edited by UrbanDisturbance; 01-06-2017 at 01:54 PM.
#7
Platinum Member
Platinum Member
BAM will be fair and much of the cost will be based on what needs to be replaced and some additional work if you are going to add clutch plates. Any cost difference should be mostly the freight.
#8
Charter Member#568
Charter Member
+1 for sending it to bam. He's a member here, he might even see this post and chime in. Mbam is his user name.
__________________
Straight bottoms and flat decks
Straight bottoms and flat decks
Last edited by bck; 01-09-2017 at 10:20 PM.
#9
Registered
Thread Starter
Join Date: Oct 2009
Location: Splendora, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the input. I am going to send it to BAM. I did not want to deal with shipping, but BAM should do it right. I have had my share of rip off artist. It's hard to find an honest company that does good work. BAM seems to have a good reputation.