Its transom assembly
#2
Platinum Member
Platinum Member
iTrader: (6)
yes...........but you need the longer in put shaft
#3
Registered
Also if you have a standard bravo 1 (not a X, XZ, or XR) you will have to have a custom drive shaft made or do what I did and sent the drive to AADS and have it converted from a bravo 1 to a bravo 1X. The ITS drive shaft (from MERC) uses the larger U joints on found on the X,XZ,&XR drives so its not as simple as changing the standard length shaft out for the ITS shaft. I documented the conversion on my thread if you want to check it out. Also you have to go full hydraulic to the helm for the ITS to work. A cable to a add on system won't work. Trust me I tried.
Phil'R Up 2001 Baja 25 Outlaw
Phil'R Up 2001 Baja 25 Outlaw