I have seal kits. less the teflon rings for the output shaft. 360-739-7159

Hi Tartilla,

I to am in need of the Merc manual. My latest issue is my boat is slow to go into forward, goes into reverse right way. Also slipped a little if I push too hard on the throttle out of the hole.
could you please send to
[email protected] ?

Thank you.

Hate to bring back an old thread but I’m also looking for info on how to adjust the reverse band on my merctrans wondering if someone can post a picture of where to adjust it or send me a copy of the manual. Thanks

Merctrans
 

Can't remember if it did when I re-sealed mine but if it's the same as the Ford FMX which it is a copy of it should. The FMX has one and its very obvious, huge bolt through the case on the driver side?. The low/reverse band sees a lot of strain, that's why its so big.

-BL

Please bring back and use these older threads that have tech in them.

I forget the Merc SeMerce Manual Volume. Scribd has them online in pdf.

They are rather large files, and don't email at all.

Aluminum ring on end of Merc 2 tail shaft housing
 

Anyone have info on tailshaft parts? Sorry to beat the horse on this thread.

I have several Merc 2 trans from my old scarab that I have converted to vp dou props, they were behind Sbc, they would need rebuilds but if you want a spare trans let me know, 200.00 plus shipping, or if you want to convert to bw trans with trs tails I have several of them, also would need rebuilds but if but at least parts available for the borg warners, anyways let me know thanks Andy

Honestly, I just need the aluminum cap that bolts on to the end of tail shaft.
https://cimg8.ibsrv.net/gimg/www.off...dbd3cd7df4.png

Ok I see what you need, I got your pm, I am not sure why I can’t reply to pm, I will check out how to ship and how much, they are heavy little devils, also my friend on this page Tahiti 25 may have seal kits if you need

Hey I got your pm with number, I feel bad that the shipping is probably more than the trans(I will get shipping amount) I googled where you are and it’s winter where you are, are you in a rush, maybe try the wanted section on this website, if your not in a rush give that a try, if that doesn’t work for you after a while, I will separate the aluminum piece you need.