Twin ASD8 set up
10-28-2020, 06:05 AM
#1
Registered
Thread Starter
Join Date: Oct 2020
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Twin ASD8 set up
HI,
I will put 2xASD8 on a 24deg V-bottom hull, planning to have 18x28P Rolla.
How close together should the propellers be??
Is it better for the propellers to "take" the water from the outside or the center of the hull.
Regards
Richard
I will put 2xASD8 on a 24deg V-bottom hull, planning to have 18x28P Rolla.
How close together should the propellers be??
Is it better for the propellers to "take" the water from the outside or the center of the hull.
Regards
Richard
Top Answer
10-28-2020, 09:46 PM
Registered
The following 2 users liked this post by kvogt:
I'CE (11-02-2020), KNOT-RIGHT (10-28-2020)
The following users liked this post:
I'CE (11-02-2020)
10-28-2020, 10:16 AM
#4
Registered
Thread Starter
Join Date: Oct 2020
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Thank you!
As I will go with dropboxes I can choose the distance a bit.
How about the propellers, some setups "take" the water from the outside and some from center..?
I will only have this boat for fun, max 80knots to stay alive..
As I will go with dropboxes I can choose the distance a bit.
How about the propellers, some setups "take" the water from the outside and some from center..?
I will only have this boat for fun, max 80knots to stay alive..
The following 10 users liked this post by kvogt:
302Sport (10-29-2020), 47EXCALIBUR (10-29-2020), abones (10-29-2020), hblair (12-29-2020), I'CE (11-02-2020), kjm5125 (11-02-2020), KNOT-RIGHT (10-29-2020), Smitty275 (10-29-2020), SUPERSTITIOUS (10-28-2020), TomZ (11-03-2020)
11-02-2020, 08:34 PM
#9
Registered
The following 5 users liked this post by I'CE:
Gimme Fuel (11-03-2020), kjm5125 (11-02-2020), Quinlan (11-03-2020), sutphen 30 (11-03-2020), TomZ (11-03-2020)
The following 2 users liked this post by boostbros:
Gimme Fuel (11-03-2020), TomZ (11-03-2020)
